loading

Xingda Aluminum - OEM & ODM Aluminium Extruded Profiles Manufacturer Since 1992.

Aluminum Profile Colors: Powder Coating, Anodizing and Wood Grain

A drawing that calls for “bronze aluminum” leaves a fabricator with two different ways to price the job. The architect may want a uniform bronze-colored coating, or a metallic surface that shows the aluminum underneath. The distinction matters when a window frame sits beside a curtain wall mullion on the same elevation.

Xingda Aluminum operates seven production lines. For buyers specifying the visible surfaces of windows, doors and façades, three processes are particularly relevant: powder coating, anodizing and wood grain transfer. Here is how to choose the finish and describe it on your order.

Powder coating for solid colors

On a powder coating line, charged powder is sprayed onto prepared aluminum profiles and cured in an oven. The coating gives the visible face its color and texture. Choose this route when the design calls for a solid color across frames, sashes and cover caps.

Give the supplier a color reference such as a RAL code, then specify gloss and texture separately. Two black profiles with the same color code can look different if one is smooth and glossy and the other has a fine textured finish. For a phased façade order, keep a physical reference for the next delivery.

Spray finishing line at Xingda Aluminum
Spray finishing equipment at Xingda Aluminum.

Anodizing for a metallic appearance

An anodizing line uses an electrochemical process to grow an oxide layer on the aluminum surface. The metal remains part of what you see. A brushed surface and a smoother surface can reflect light differently even when both are ordered in the same anodized shade.

If a replacement door must match an existing anodized storefront, send a short piece of the original trim when possible. Identify the exposed face and any brushing direction. For a new project, agree on the acceptable shade range and record the anodic coating specification separately from the visual reference.

Aluminum profile anodizing line at Xingda Aluminum
Xingda’s anodizing line for aluminum profiles.

Wood grain transfer for a patterned finish

A wood grain transfer line applies a printed pattern to a coated aluminum profile using heat. The base color, grain pattern and direction all affect the result. A description such as “oak” leaves each of those choices open.

For a wood-look entrance, mark the grain direction on the door elevation. At a corner where a horizontal rail meets a vertical stile, show the intended appearance of the joint. Ask for a sample long enough to see the pattern repeat, especially if the profile has a wide visible face.

Wood grain finish on aluminum sliding door lower track profiles
Finished sliding door track profiles showing the wood grain along their length.

Request a finish sample and a comparable quotation

Send Xingda the profile drawing or a photo of the existing section, the quantity and cut length for each color, and the project destination. Mark the faces visible after assembly. Tell us whether the profiles will be used indoors, outdoors or near the coast, and include any coating specification named in the project documents. This lets us review the appearance and the service requirements together.

For example, a window fabricator could write: “Please quote the frame and sash profiles in the attached drawing. The exterior faces should match our fine-textured black sample. Quantities and cut lengths are listed by profile. Please list sampling cost, minimum quantity per finish and production lead time separately.”

Contact Xingda Aluminum to discuss your colors and request a finish quotation.

prev
How to Approve Aluminum Profile Finish Samples Before Production
How to Request a Quote for Aluminum Hidden Doors: A Buyer’s Checklist
next
recommended for you
Get in touch with us
We offer one-stop services to our customers. With our advanced automated production lines, powder coating lines, and anodizing lines, you can always find the surface treatment you need. 
Contact Us
Contact Person: Ken Chen
Tel: +86 13434645712
WhatsApp: +86 13434645712
Address: No.16, Nanjiang Avenue, Nanjiang Industrial Park, Sihui City, Zhaoqing, Guangdong Province, China
Address: Room 3102, Building B5, No. 28 Haiwu Road, Guicheng Street, Nanhai District, Foshan City
Copyright © 2026 Shengyu Xingda Aluminum Co., Ltd. | Sitemap  |  Privacy Policy 
Contact us
messenger
phone
email
wechat
whatsapp
Contact customer service
Contact us
messenger
phone
email
wechat
whatsapp
cancel
Customer service