If you need another batch of aluminum sliding window profiles, the most useful photo you can send us is one taken straight at the cut end of the section. A photo of the finished window tells us how it opens. The cut end shows us the shape we need to match.
Say you need 300 lengths of bottom rail for a window your workshop already makes. You have the series name, the color and an old invoice. That is enough to start an inquiry. Before you place the order, though, there is one practical question to settle: will the new rail take the roller you already stock?
Keep a short offcut of the old rail and one of the rollers your workshop uses with it. Take one photo with the roller fitted and another with it removed. If you have a section drawing, mark the width of the roller channel on it. If you only have the offcut, measure the channel with calipers and include the reading in your message.
The same idea applies to other sections. If you are ordering a meeting stile, include the mating stile so we can see how the two interlock. For a sash section, tell us the glass thickness and show the glazing bead and gasket you intend to keep. Two profiles can have the same outside width and still fit different accessories.
A price per kilogram is only half the quotation. Ask for the weight per meter and the stock length as well. Here is an example using two six-meter bars at an illustrative price of US$3.00/kg.
| Quoted weight | Weight of one 6 m bar | Aluminum cost per bar |
|---|---|---|
| 0.82 kg/m | 4.92 kg | US$14.76 |
| 0.90 kg/m | 5.40 kg | US$16.20 |
On 300 bars, that is a US$432 difference before packing and freight. Check both section drawings against the wall thickness you specified before choosing between the offers. Also check the bar length against your cutting list. Your workshop pays for the offcuts too.
When the sample arrives, give it to the person who assembles the windows. For the bottom rail in our example, ask them to fit the usual roller, join the rail to an existing stile and run the assembly on a short piece of your track. If the order will sit alongside older stock, compare the finish in daylight as well. Keep the approved sample with its section number so the next buyer has something definite to reorder.
For a profile match, email manager@xingdal.com with the end-view photo or drawing, the required finish, bar length and quantity. Include the accessory you need to keep using.